01 The principle of rolling
Put the meat injected with brine (including auxiliary materials such as phosphate) into the tumbler, and run the machine at full speed. The meat pieces are rolled in the belly of the machine. Part of the meat is raised by the baffle and then falls freely. The lower meat bumps against each other. Because the rotation is continuous, each piece of meat has the opportunity to flip itself, rub each other and collide with each other. In this way, the original stiff meat can be softened, the muscle tissue can be relaxed, the salt water can easily penetrate and spread, the color of the meat can be uniform, and it can be mixed.
Due to the constant rolling and mutual squeezing, the protein in the muscle and the unabsorbed salt water can form a colloidal substance. Once heated, this part of the protein will coagulate first to prevent the juice from leaking and losing, thereby improving the water retention of the product It keeps the meat fresh and tender, and also improves the yield. In addition, the extraction of salt-soluble protein increases the stickiness and slicing properties of the product, and improves the quality of the product.
02 Ambient temperature
Usually, the ambient temperature for rolling should be 0-4℃, because at this temperature, the growth and reproduction of various microorganisms can be reduced to a minimum. According to relevant research data, when the meat filling is rolled at 8°C or higher, the binding force, yield and sliceability of the product will be significantly reduced, but the temperature of the rolling environment is not too high. Although minced meat can shorten the tumbling time, reduce production costs, and get better hair color in a warmer environment, considering the internal quality, shelf life, safety and other aspects of the product, the ambient temperature for tumbling should be 0 -4℃ is more suitable.
03 Actual feeding amount
Proper tumbling load is the basic factor to achieve the best tumbling effect, and it is also the basic guarantee for equipment maintenance. If the amount of feed is too large, the falling and movement of the meat will be restricted, and the desired effect will not be achieved within the specified process time; on the contrary, if the feed is too small, the meat will fall too much and the meat will be beaten. Too shredded, resulting in excessive rolling of the meat, the texture of the meat is too soft, the meat effect of the product is reduced, and the temperature of the meat will rise rapidly, resulting in the denaturation of the meat protein, thereby affecting the internal quality of the product.
Therefore, when tumbling, we should determine the actual feeding quantity according to the design capacity of the tumbling machine to ensure that the desired tumbling effect can be achieved. It is usually recommended to feed at about 60% of the equipment volume. At the same time, the actual feeding amount can be adjusted slightly according to the size and density of the meat to achieve the best tumbling effect.
04 Vacuum
Vacuum is one of the most important functions of the tumbler. The advantage of using vacuum tumbling in meat products is that by vacuuming, the air between the meat raw materials and their exudates can be discharged, so that thermal expansion will not occur in the subsequent thermal processing to damage the structure of the product. Vacuum tumbling also helps to improve the appearance and color of cured meat products. The oxidation reaction in the curing process of meat products is extremely unfavorable to the appearance and color of the products. The use of vacuum tumbling will not cause oxidation reaction during long continuous production. The vacuum can ensure that the salt water penetrates into the meat quickly, and it also helps to remove the pores in the meat, and the vacuum expands the meat to improve the tenderness. However, the vacuum degree should not be too high, otherwise the moisture in the meat can be easily drawn out under high vacuum, which will affect the quality of the meat filling. Generally, the vacuum degree is -0.07~-0.08Mpa.
Rotation speed and direction: The tumbling speed controls the falling ability of the meat in the tumbling machine. According to different types of products, it is generally controlled at 8-12r/min. In addition, the tumbling machine should gently push, massage, lift and drop the meat to achieve a better tumbling effect.
The operation of the tumbling machine should not be continuous. The general method is to adopt the process of intermittent tumbling. Let the equipment run for a period of time, then stop for a period of time, and repeat the operation (the meat "rest" in the middle) until the expected rolling is achieved. Knead effect. If the equipment has a reversal function, it can also adopt the process of forward-reverse-stop intermittent tumbling, mainly to avoid the increase in meat temperature due to friction, and at the same time to make the structure of the meat not easy to be damaged.
05 Total rolling time
To determine the total rolling time is the key factor to achieve the ideal rolling effect. The general formula for calculating the total rolling time of a rolling machine is T=U×N/L. Where T represents the total rotation time of the tumbler (the time of intermittent tumbler is not included); U represents the inner circumference of the tumbler (the inner diameter of the tumbler is multiplied by the pi); N represents the tumbler Rotation speed; L is a constant, representing the total distance of the tumbler rotation, the rotation distance L is generally controlled at 10000-12000m






