When the JR-300 frequency conversion frozen meat grinder works, the raw meat in the hopper is pushed to the pre-cut orifice plate in the cutter box mainly by the rotating screw.
The meat is cut into pieces by the shearing action formed by the rotating cutting blade and the orifice blade, and the meat particles are continuously discharged out of the orifice under the action of the screw extrusion force.
The specially designed screw for frozen and fresh meat is made by precision casting process, which makes the geometrical shape of the screw and the strength and rigidity of the bearing capacity are greater than that of the welded screw.
The specially designed box can hold 4 standard frozen meat steaks. The frozen steak is placed in the middle of the meat hopper.
A shearing bar is set near the turning point of the auger. The specially designed screw auger and the shearing bar form a shear. After shredding, push into the cutter box.
Therefore, the meat grinder is easy to clean. The auger hoisting frame is designed on the nose according to the customer's needs, and the hoisting device can easily take out and place the auger. (The spreader is provided by the customer)
Machine advice: meat grinder, meat mince
