Planetary mixer is a very efficient mixing equipment. Unlike other mixers, the planetary agitator rotates around the axis of the escalator and rotates around its own axis at different speeds to make the material move in the kettle. To the strong shear. In addition, the scraping knife in the equipment rotates around the axis of the kettle body, scraping the material sticking to the wall and mixing to make the effect more ideal.
Planetary mixer is a very efficient mixing equipment. Unlike other mixers, the planetary agitator rotates around the axis of the escalator and rotates around its own axis at different speeds to make the material move in the kettle. To the strong shear. In addition, the scraping knife in the equipment rotates around the axis of the kettle body, scraping the material sticking to the wall and mixing to make the effect more ideal.
Use regulations
1. The material to be stirred must be added to the mixer after the vertical axis planetary mixer is in normal operation. It is strictly forbidden to add the mixture to the mixer before starting. In case of power failure of the equipment, the discharge door should be opened immediately and the mixture in the mixing tank should be placed to prevent condensation.
2. The amount of the material to be mixed must not exceed 10% of the rated capacity of the vertical axis planetary mixer.
3. The aggregate particle size added must not exceed the specified range of the vertical axis planetary mixer equipment.
4. In order to ensure that the material to be stirred does not stick to the hopper, the stirring material must be layered strictly in the following order when it is placed in the mixing tank, the bottom fine aggregate, the intermediate cement, and the upper coarse aggregate.
5. The material to be stirred must be completely discharged before adding new materials.
6. The machine is not allowed to be inspected and lubricated during operation. It should be installed in the tank after the main engine is completely shut down and the power is turned off.
working principle
When the planet carrier rotates, the three stirring shafts in the box rotate around the drum, and the stirring shaft rotates at a high speed, so that the material is strongly sheared and pinched for the purpose of full dispersion and mixing, and there is a scraping on the planet carrier. The wall cutter rotates with the planet carrier, continuously scraping the wall of the barrel, so that the barrel wall has no stagnant material and improves the mixing effect. The length of the mixing time of the planetary mixer is adjusted according to the material properties. The user can adjust and control through the control panel. The cover and the planetary agitator are hydraulically lifted by the double column, which is convenient and quick to operate.
